Category Archives: Rebuilt Transfer Cases

Rebuild Services–Labor

Posted on December 10, 2011 by Herm

I offer rebuild services for the following transfer cases: D-18 t/f cases    $125  labor only D-20 t/f case     $150 labor only  

Posted in Rebuilt Transfer Cases | Comments Off on Rebuild Services–Labor

Rebuilt D-18 3/4″ Small Hole T/F case 27 Tooth $400

Posted on December 10, 2011 by Herm

This rebuilt D-18  is completely rebuilt with all new bearings, gaskets, seals, thrust washers, intermediate shaft and needle bearings and comes with a new pivot pin and clutch pivot ball. No shift levers  and no e-brake assembly. All t/f case … Continue reading →

Posted in Rebuilt Transfer Cases | Comments Off on Rebuilt D-18 3/4″ Small Hole T/F case 27 Tooth $400

Rebuilt D-18 1 1/8″ Small Hole T/F case 26 Tooth $375

Posted on December 10, 2011 by Herm

This rebuilt D-18  is completely rebuilt with all new bearings, gaskets, seals, thrust washers, intermediate shaft and needle bearings and comes with a new pivot pin and clutch pivot ball. No shift levers  and no e-brake assembly. All t/f case … Continue reading →

Posted in Rebuilt Transfer Cases | Comments Off on Rebuilt D-18 1 1/8″ Small Hole T/F case 26 Tooth $375

Rebuild D-18 1 1/4″ Small Hole T/F Case 29 Tooth $400

Posted on December 10, 2011 by Herm

This rebuilt D-18  is completely rebuilt with all new bearings, gaskets, seals, thrust washers, intermediate shaft and needle bearings and comes with a new pivot pin and clutch pivot ball. No shift levers  and no e-brake assembly. All t/f case … Continue reading →

Posted in Rebuilt Transfer Cases | Comments Off on Rebuild D-18 1 1/4″ Small Hole T/F Case 29 Tooth $400

Rebuilt D-18 1 1/4″ Large Hole t/f Case 29 Tooth $425

Posted on December 10, 2011 by Herm

This rebuilt D-18  is completely rebuilt with all new bearings, gaskets, seals, thrust washers, intermediate shaft and needle bearings and comes with a new pivot pin and clutch pivot ball. No shift levers  and no e-brake assembly. All t/f case … Continue reading →

Posted in Rebuilt Transfer Cases | Comments Off on Rebuilt D-18 1 1/4″ Large Hole t/f Case 29 Tooth $425

Rebuilt D-18 Tera-Low T/F Case (3.15-1) With/Out Mainshaft Gear $1000

Posted on December 10, 2011 by Herm

This transfer case assembly is completely rebuilt with new gaskets, seals, bearings, Intermediate shaft, needles, thrust washers and all small parts are replaced. This case has been specially ground for clearance for the tera-Low gear set. No core charge.

Posted in Rebuilt Transfer Cases | Comments Off on Rebuilt D-18 Tera-Low T/F Case (3.15-1) With/Out Mainshaft Gear $1000

Rebuilt D-18 Tera-Low T/F Case (3.15-1) With Mainshaft Gear $1100

Posted on December 10, 2011 by Herm

This transfer case assembly is completely rebuilt with new gaskets, seals, bearings, Intermediate shaft, needles, thrust washers and all small parts are replaced. This case has been specially ground for clearance for the tera-Low gear set. No core charge.

Posted in Rebuilt Transfer Cases | Comments Off on Rebuilt D-18 Tera-Low T/F Case (3.15-1) With Mainshaft Gear $1100

Rebuilt D-20 Tera-Low T/F case (3.15-1) With Mainshaft Gear $1350

Posted on December 10, 2011 by Herm

This transfer case assembly is completely rebuilt with new gaskets, seals, bearings, Intermediate shaft, needles, thrust washers and all small parts are replaced. This case has been specially ground for clearance for the tera-Low gear set. No core charge.  

Posted in Rebuilt Transfer Cases | Comments Off on Rebuilt D-20 Tera-Low T/F case (3.15-1) With Mainshaft Gear $1350