4 inch Winch Snatch Block – $45

Import block designed for 3/8″ cable, decreases load on winch by 50%.  This can be easily installed on your cable when needed or detached when not required.  Features a detachable eye with quick-release toggle for securing block. 3 ton capacity and very necessary for winching.

3 inch Winch Snatch Block – $ 30

This snatch block has a 3″ pulley.  It is compact and very durable. It is similar to the 4″ block listed above.

Bellevue/Warn replacement 12v winch motor Brand New (Power in only)- $220

These are good strong brand new motors for the Warn/Bellevue winches. If you have a brake assembly on your winch motor, and would like to re-use it, a very minor modification will be necessary to reuse it on this motor. We can easily provide this service for you with your motor brake and an additional $25.00

Bellevue winch rebuild kit – $140

All the bearings, seals, and bushings you need to rebuild your old Bellevue winch. Parts available individually as well. Special bushings – $15 ea.

Warn 8274 rebuild kit – $100

Includes the base bearings and seals you need to rebuild a Warn 8274 winch

Bellevue/Warn 3 post motor new – $325

Solenoid pack with 2 remotes – $120

Warn Style Roller Fairleads – $50 

8274 Warn Winch Replacement Solenoid – $30

Silver contacts for high-current use and with a galvanized case.

Warn Flat Mount Winch Solenoid – $32

Bellevue/Warn Replacement Parts

Brake Band, exchange Only – $60

Brake Band and Brake Engagement Lever Assembly – $100

Brake Engagement Lever – $55

Clutch Engagement Lever – $55

Remote Push/Pull Control Cable – $32 (out of stock)
*One Required

Remote Twist and Lock Control Cable – $55 (out of stock)
*Two Required

Lock Pins for levers – $7 ea
3 Required   – $20

Dash ID Plate – $25 (out of stock)

Dash ID Plate and Control Cable Assemblies – $175 (out of stock)

*Includes –  Dash ID Plate, 2 Twist and lock control cables, and Remote Push/Pull Cable, and lock pins for levers.

Stainless Steel Hause for synthetic rope – $

Koenig PTO Replacement Handle Assembly – $50

Koenig PTO Reel Assembly Replacement Parts NEW (See Tech Page for Part Numbers)

40023     Light Spring for 40027 Pin – $3.50  (image)

40024     Heavy Spring for 40469 Handle – $3.50

40025     Small Pin – $8.00  (image)

40026     Bushing – $5.00  (image)

40027     Large Pin for Engagement – $28.00  (image)

40275     Cable Clamp – $8.00

40469     Clutch Arm – $90.00  (image)

40473     Brake Shoe – $100.00  (image)

Brake Shoe and rivets Repair Kit – $38  (image)

40624     “A” Frame Assembly Complete – $380.00  (images 1, 2, 3)

114/40470         End Support Bracket – $115.00  (image)

114/40470-A     End Support Bracket Assembly – $380.00  (images 1, 2, 3)

40470     Shifter Bracket – $90

Ramsey PTO Replacement Handle Assembly – $50

Ramsey PTO Reel Assembly Handle – $90

Ramsey Electric Replacement Solenoid – $60

Basic Ramsey PTO Rebuild Kit – $110

Basic Koenig PTO Rebuild Kit – $88