19 Spline Full Floating Axle Kits

These axles fit 1946- 1971 Offset #41-#44 taper & flange axle differential assemblies. Our axles are made here in the U.S.A. with high strength 1541 H Alloy. Our axle shafts have less weak points, and a stronger material than stock, resulting in a much stronger axle for your rig.

10 spline axle assemblies need to change spyder gears or carriers to 19 or 30 spline. New style locker assemblies are 30 spline. Also upon installing the full floating axles, the center pins located in the cross shaft(s) must be removed before installation.

Axle Kit #1 – $550

  • 1 each long side axle 19 x 27  (31 3/8″)
  • 1 each short side axle 19 x 27  (22 7/8″)

Axle Kit #2 – $120   (Image)

  • 2 each 27-spline drive flanges
  • 2 each dust caps
  • 2 each gaskets

Axle Kit #5 – All New Components – $1050

  • 1 each long side axle 19 x 27  (31 3/8″)
  • 1 each short side axle 19 x 27  (22 7/8″)
  • 2 each wheel hubs
  • 2 each machined spindles
  • 4 each wheel bearings
  • 4 each wheel bearing races
  • 2 each wheel bearing seals
  • 2 each axle seals
  • 2 each spindle nut and washer kits
  • 10 each wheel studs

Axle Kit #6, All New Components – $1150

  • 1 each long side axle 19 x 27  (31 3/8″)
  • 1 each short side axle 19 x 27  (22 7/8″)
  • 2 each 27-spline drive flanges
  • 2 each drive flange gaskets
  • 2 each dust caps
  • 2 each wheel hubs
  • 2 each machined spindles
  • 4 each wheel bearings
  • 4 each wheel bearing races
  • 2 each wheel bearing seals
  • 2 each axle seals
  • 2 each spindle nut and washer kits
  • 10 each wheel studs

Locking Hubs are now available!

  • Warn (6 Bolt/27 spline)  $190   (image)
  • Warn (6 Bolt/10 spline)  $200
  • AVM (6 Bolt/27 spline)  $120   (image)

Individual parts are available also

  • 1 each long side axle 19 x 27  (31 3/8″)—————$ 300.00
  • 1 each short side axle 19 x 27  (22 7/8″)————–$ 300.00
  • 1 each long side axle 30 x 27  (31 3/8″)—————$ 300.00
  • 1 each short side axle 30 x 27  (22 7/8″)————–$ 300.00
  • 1 each new wheel hub————————–$ 60.00
  • 1 each new machined spindle————-$ 90.00
  • 4 each wheel bearings @ $16.00 ea———–$  64.00
  • 4 each wheel bearing races @ $9.00 ea——-$  36.00
  • 2 each wheel bearing seals @ $4.50 ea——-$   9.00
  • 2 each axle seals @ $12.00 ea—————-$  24.00
  • 2 each spindle nut and washer kits @ $6.00–$  12.00
  • 2 each flange caps @ $60.00 ea ——-$120.00
  • 2 each flange gaskets @ $2.00 ea ——$4.00
  • 10 each wheel studs @ ——————-$15.00

Flange Cap Set – $120

Axle Warranty –

If you break an axle (even of your own fault) and provide proof of purchase, a replacement axle cost will be 60% of current cost to the original purchaser. Although we really doubt you ever will.