Blog Archives

SHIFT LINKAGE KITS FOR ATV OVERDRIVES

Some of these linkage kits are available in front and rear shift. The position of the handle is the same for both versions Depending on the application, minor trimming of the floor and/or transmission cover may be required. The folowing … Continue reading

More Galleries | Comments Off on SHIFT LINKAGE KITS FOR ATV OVERDRIVES

Application Information

Application Information To select the proper overdrive model, find your vehicle model and transmission type listed below. To determine what tooth count you have in your D-18 transfer case, the rear cover plate that is held on with 5 bolts … Continue reading

More Galleries | Comments Off on Application Information

Reconditioned WARN 8274 8,000 lb Winch

This gallery contains 1 photo.

$850 Reconditioned WARN 8274 Spur Gear Upright Winch.  8,000 lb Power-In/Power-Out with remote.  Comes with a new motor and solenoids installed. Winch cable available separately. Winch has been disassembled, cleaned, inspected and re-assembled with new bearings, seals and clutch pack. … Continue reading

More Galleries | Comments Off on Reconditioned WARN 8274 8,000 lb Winch

Dana 18 Twin Stick Conversion Kit

This gallery contains 1 photo.

$150.00 This kit includes all the parts you will need to convert your single stick D-18 transfer case to a dual stick.  This kit includes a reconditioned dual stick extension housing, 2 ea reconditioned shift rails, 1 ea pivot pin for … Continue reading

More Galleries | Comments Off on Dana 18 Twin Stick Conversion Kit

Dual Reservoir Master Cylinder Conversion Kit

This gallery contains 4 photos.

This kit is an important safety upgrade from a single reservoir braking system.  The kit includes a dual reservoir master cylinder, mounting brackets and all required fasteners and instructions.  After removing the original bracket (an air cut-off tool works well), … Continue reading

More Galleries | Comments Off on Dual Reservoir Master Cylinder Conversion Kit

Rebuilt Bellview 6000/8000 lb Winches

This gallery contains 3 photos.

  $550 – Rebuilt winch, new motor, and new roller fairleads. The original upright spur gear winch.  The Bellview 8000 is the old school father of the modern Warn 8274 winch.  Originally manufactured by Bellview as a 6000 lb winch, … Continue reading

More Galleries | Comments Off on Rebuilt Bellview 6000/8000 lb Winches