All prices are subject to change before this website can be revised.  Please contact me for the latest prices when ordering.  Images on this page are thumbnailed for quicker viewing.  Click on each image for full-size versions.

New!

Full Floating Axle Kits

1959-1970 Jeep CJ's with 19-spline tapered axles and early CJs with the Dana 44 tapered axle housing that have had the early 10-spline carrier changed to a 19-spline carrier.

Axle Kit #1 - $380

1 each long side axle 19 x 27
1 each short side axle 19 x 27

Axle Kit #2 - $90

2 each 27-spline drive flanges
2 each dust caps


Axle Kit #3 - $720

1 each long side axle 19 x 27
1 each short side axle 19 x 27
2 each wheel hubs
2 each spindles
4 each wheel bearings
4 each wheel bearing races
2 each wheel bearing seals
2 each axle seals
2 each spindle nut and washer kits

Axle Kit #4 - $800

1 each long side axle 19 x 27
1 each short side axle 19 x 27
2 each 27-spline drive flanges
2 each dust caps
2 each wheel hubs
2 each spindles
4 each wheel bearings
4 each wheel bearing races
2 each wheel bearing seals
2 each axle seals
2 each spindle nut and washer kits

Locking Hubs are now available!
Coming Soon!

I will be adding the 30 spline full floating axles to my line in the future so that Jeepers can install air lockers, detroit lockers and other positraction options that require a 30 spline axle for the D-44 taper axle rear ends. These axles will be the same high quality as the 19 spline axles that I presently offer. Prices will also be the same as the 19 spline axles and axle kits.

 


PTO Overdrive Adapters

W-1223 PTO Adapter Kit for the Saturn and Warn overdrive - $235.00


This aluminum casting is designed for attaching a Ramsey, Koenig or Spicer PTO behind a Saturn or Warn Overdrive when utilizing a PTO winch or other attachments on a Dana 18 transfer case.  Click on the picture to see installation instructions.  The PTO adapter kit includes everything needed to make the conversion complete.  A rear PTO drive shaft will need to be shortened.  A front PTO drive shaft will need an extension, sold separately.

If you have a dual stick PTO please advise us when you order your pto adapter!



H-1223 PTO Adapter Kit for the Husky, Dualamatic or Selectro overdrive - $260.00

(Not Illustrated, similar to above.)


Individual Parts for the PTO Adapter Kit are available separately.







 


Windshield Wiper Motors and Conversion Kits

Individual wiper motor assemblies

This wiper motor assembly has a stainless steel case and is marine quality and comes complete with the wiper arm and blade.

A-17508-SS6v----6 volt wiper assembly----$ 65.00

A-17508-SS12v--12 volt wiper assembly----$ 65.00

ATV Heavy Duty Wiper Motor - $120.00

This is a heavy duty American Bosch motor assembly that was original equipment on the early CJ's with the overhead wipers. This is a gear drive unit and comes with a heavy duty wiper arm and blade assembly. The wiper blade is 12" long and can be cut to length for your application. This is also available in single speed for $100.00. I have limited availability on the single speed as they have been discontinued.

ATV #EWM-12/2SPD Volt Wiper Motor Conversion Kit - $185.00

This conversion kit replaces the stock vacuum wiper motor with a 2-speed electric motor on the early Jeep Utility Wagons, Pickups and 1948-51 Jeepsters.  This assembly attaches to the firewall in the same position as original with four screws and utilizes the stock drive cables under the dash.  The kit also includes a new switch that resembles and replaces the original vacuum wiper switch.  Click on the picture to see an installed view.


ATV #12V-WSH - This optional switch position switch adds a washer function - $12



Windshield Washer Kit - $48

Complete kit with mounting bracket, Tygon hose, wiring, pump motor, adjustable nozzles and pushbutton switch.





 
ATV-8161800 Defroster Manifold - $35.00

This defroster manifold is a reproduction of the original factory part used on the CJ-3B windshield frame.  The manifold comes with two mounting brackets and fasteners.  This manifold is also applicable to the CJ-2A and CJ-3A Universal Jeeps.

Out of Stock



 

Brakes

Dual Reservoir Master Cylinder Conversion Kit - $150 w/ new master cylinder, $120 w/ rebuilt

Kits available for all Jeeps 1941-1971, trucks and wagons through 1962.  Please state application with drum or disc brakes when ordering.

This kit is an important safety upgrade from a single reservoir braking system.  The kit includes a dual reservoir master cylinder, mounting brackets and all required fasteners and instructions.  After removing the original bracket (an air cut-off tool works well), the new large bracket attaches to existing holes in the frame.  The small bracket attaches to the clutch tube cross shaft and the large bracket.  The existing linkage from the pedal is reused for a simple installation.  Other than new brake lines, no further modifications are needed.  Click on the picture to the left to see an installed view.  Read more about a similar conversion at Derek Redmond's CJ3B Page.

 Dual Reservoir Master Cylinder Conversion Kit for Disc Brakes - $165 (New Master Cylinder only, with correct residual valve built in)  Similar to above illustration.

Dual Reservoir Master Cylinder Brackets and Fastener Kit - $70 Does not include the master cylinder.

Banjo Bolt 90 Degree Adapter Kit - For dual reservoir Master Cylinder Conversions with limited space, please add my Banjo bolt kit.  This banjo bolts and unions included in this kit add only 1" to the master cylinder width.  Recommended for F-head installations. - $25

  • 2 ea special banjo bolts
  • 2 ea special brass unions
  • 4 ea copper washers
Note: Some models may require trimming of a vertical bracket above the pedal shaft.  Once the kit is installed, this bracket is no longer needed:

Master Cylinder Hydraulic Bench Bleeder Kit - $7

Includes fittings, hose and clips to bench bleed your master cylinder without making a mess.  Manufactured by Raybestos.  Includes Instructions.


 
Remote Master Cylinder Reservoir - $15

Includes a refurbished Reservoir only. This add-on Reservoir makes it easy to keep the brake fluid topped up on either the stock master cylinder or the dual reservoir style shown above.  With a remote reservoir mounted high on the firewall, checking the fluid level will be a quick and simple process.  

Installation requires a fitting to be attached to the lid of the master cylinder, a length of Tygon hose and two hose clamps.  These parts are not included with the reservoir.


CJ 11" Drum Brake Conversion Kit - $600

Includes new Wagner drums, new Wagner wheel cylinders, new Wagner brake hardware kit, new Wagner brake shoes and reconditioned backing plates.

 

Willys Wagons/Pickup 11" Drum Brake Conversion Kit - $650

Includes new Wagner drums, new Wagner wheel cylinders, new Wagner brake hardware kit, new Wagner brake shoes and reconditioned backing plates.  Kits are set-up for emergency brake cables.

Dana 25/27 Front Axle Disc Brake Conversion Kits

Add your own parts or choose a master conversion kit.  Some grinding may be required for clearance.

Disc Brake kit #1 - $375.00

2 ea reconditioned caliper holders

2 ea new hub and rotors

Disc brake kit #2 - $600

2 ea reconditioned caliper holders

2 ea new hub and rotors

2 ea rebuilt calipers

2 ea new brake hoses

2 ea new banjo bolts

4 ea new wheel bearings

4 ea new wheel bearing races

2 ea new wheel seals

Wheel bearing nut kit - $12

4 ea wheel bearing nuts

2 ea wheel bearing washers

2 ea wheel crimp type washers

Engine Mounts

CJ Conversion Motor Mounts for GM Engines - $95

Used to install Chevrolet V8 or V6 Engines in CJs, Wagons and Pickups.  Can be bolted or welded in.

Power Steering

Power Steering Conversion Kit - $175, Gearbox not included - See the Steering Components page for more details


This is a bolt-on kit which mounts a reverse pattern Ford steering box behind the radiator and inside the frame on 1971 and earlier CJ's.  This eliminates frame flex as seen with other types of power steering conversions and offers better handling.  The kit comes complete with mounting bracket, fasteners, special Pitman arm and instructions.

Miscellaneous Parts
 

ATV 674268-Flat Fender Body Drain Plugs - $10.00/pr

These rubber plugs fit the oval drain holes on the side body panels, just above the floor panels, on the CJ-2A, CJ-3A and CJ-3B Universal Jeeps.







ATV 668921 Windshield Pivot Bolts - $30/pair

These special bolts are applicable to the CJ-2A, CJ-3A and CJ-3B Jeep vehicles.  These are exactly as original but made with highly polished 316 Stainless Steel and are a very attactive addition as a replacement part.




ATV 691731 Windshield Bumper Blocks - $14.00/pr.

These wood blocks are similar to the stock bumper blocks with the exception that they are made from white oak.  The recessed screw holes are not as deep as original to leave more material under the screw heads for greater strength.  The blocks feature routed edges and an all-weather finish.



 
Hood Welting Kit - $15

Braided oilcloth lacing for the top edge of the grill.  Includes 3/16" aluminum Pop rivets for installation.  Use an awl or leather punch to match existing holes in top edge of grill.  Available applications include MB, CJ-2A; CJ-3A; M38, CJ-3B, CJ-5, CJ6, M38A1 and Jeep Utility Wagons and Pick-Ups.  Please specify your application when ordering.





 
Shifter Decal for your dashboard - 3 Speed Transmission/Twin Stick Transfer Case - $5 w/ free postage







3 Speed Transmission/Single Stick Transfer Case - $5 w/ free postage







Overdrive Decal - Free with any purchase on the Overdrive page.  Previous overdrive buyers, please send a stamped, self-addressed envelope for your free decal.  All others, the decals are available for $2.50 with free postage.